Cubeset V1.25 and the new firmware improve:

• Noise (fmi noise),
• Dual input and missing gear shifters
• Stability and battery life
• Reduces the brightness of the LEDs by a few steps on all wheels

The update procedure for all wheels remains the same:

• Remember to do a “CLEAR FLASH DATA” before or after the update
• Turn the device off and on again
• Recalibrate shifters, clutches, and reset the LEDs color

The clutches configuration is like this:

• Enable clutches
• Calibrate gear shifters
• Save settings
• In the input section calibrate the clutches
• Save settings
• Calibrate your bitepoint
• Save settings

NOTE1: On Csx 3, a single on/off selection control for extra shifters, a single firmware with Cubeset V1.25. In the paddle section, enable/disable extra shifters depending on the device. Save settings, turn the device off and on again.

NOTE2: For steering wheels with Bluetooth, after each update or Clear Flash Data, it is necessary to delete the old Bluetooth connection/pairing and pair the steering wheel again